Skip to content

Published with permission from the Federation Internationale de l' Automobile.

ARTICLE 20: TELEVISION CAMERAS AND TIMING TRANSPONDERS
20.1 Presence of cameras and camera housings:
All cars must be fitted with either two cameras, two camera housings or one of each at all times throughout the Event.
20.2 Location of camera housings:
Camera housings, when used, must be fitted in the same location as cameras. Details concerning the size and weight of all camera housings may be found in the Appendix to these regulations.
20.3 Location and fitting of camera equipment:
20.3.1 All cars must be equipped with five positions in which cameras or camera housings can be fitted. Referring to Drawing 6, all cars must carry a camera or camera housing in position 4, the position of the remaining camera or camera housing will be determined by the FIA after consultation with the relevant Competitor.
Once positions are determined in the above manner, any decision as to whether a camera or camera housing is fitted in those positions will rest solely with the relevant Competitor.
20.3.2 Any camera or dummy camera fitted in positions 2 or 3 shown in Drawing 6 must be mounted in order that its major axis does not subtend an angle greater than 5° to the reference plane.
20.4 Transponders:
All cars must be fitted with a timing transponder supplied by the officially appointed timekeepers. This transponder must be fitted in strict accordance with the instructions detailed in the Appendix to these regulations.