News
FIA World Motor Sport Council approves power unit regulations for 2026
The FIA World Motor Sport Council has today approved power unit regulations set to come into effect for the 2026 season – with increased electrical power and 100% sustainable fuels two of the key aspects of the newly-approved rules.
The 2026 Formula 1 power units will maintain the current V6 internal combustion engine architecture, with the FIA setting out four key pillars of the new regulations:
-
Maintaining the spectacle – the 2026 power unit will have similar performance to the current designs, utilising high-power, high-revving V6 internal combustion engines and avoiding excessive performance differentiation to allow for improved raceability
-
Environmental sustainability – the 2026 power unit will include an increase in the deployment of electrical power to up to 50% and utilise a 100% sustainable fuel
-
Financial sustainability – financial regulations regarding the power units will reduce the overall costs for competitors whilst retaining the cutting-edge technological showcase that is at the core of Formula 1
-
Attractive to new power unit manufacturers – the regulations are intended to make it possible and attractive for newcomers to join the sport at a competitive level
The 2026 regulations will see the current Motor Generator Unit Heat, or MGU-H, element removed – while the power output on the power units’ Energy Recovery Systems will be increased to 350 kilowatts.
This feature is currently not available because you need to provide consent to functional cookies. Please update your
2026 Engine regulations: everything you need to know
The regulations, said the FIA, were arrived at via “collaborative consultation between the FIA and both incumbent and potential new PU manufacturers”.
Speaking about the agreement on the regulations, FIA President Mohammed Ben Sulayem said: “The FIA continues to push forward on innovation and sustainability – across our entire motor sport portfolio – the 2026 Formula 1 Power Unit Regulations are the most high-profile example of that mission.
READ MORE: Formula 1 on course to deliver 100% sustainable fuels for 2026
“The introduction of advanced PU technology along with synthetic sustainable fuels aligns with our objective of delivering benefits for road car users and meeting our objective of net zero carbon by 2030. Formula 1 is currently enjoying immense growth and we are confident these regulations will build on the excitement our 2022 changes have produced.
“I want to thank all of the FIA management and technical staff involved in this process for their diligence and commitment in working together with all of our Formula 1 stakeholders to deliver this. I also want to thank our WMSC members for their consideration and approval of these regulations.”
2022 and 2023 porpoising and roll hoop regulations approved
The WMSC also approved changes to the 2022 and 2023 Technical Regulations, designed to address both the issue of aerodynamic porpoising and of safety standards for roll hoops.
With regards to porpoising, it has now been approved that from this month's Belgian Grand Prix until the end of the season, there will be changes to re-define the stiffness requirements of the plank and skids around the thickness measurement holes on the cars – in addition to the changes already signalled by a Technical Directive issued to the teams ahead of the summer break.
From 2023, meanwhile, the following changes will be made:
- The floor edges will be raised by 15mm
- The diffuser throat height will be raised
- The diffuser edge stiffness will be increased
- An additional sensor will be mandated to monitor the porpoising phenomenon more effectively
Additionally, following Alfa Romeo driver Zhou Guanyu’s crash at the start of the 2022 British Grand Prix, the following changes surrounding safety standards for the roll hoops on F1 cars were also approved to become part of the 2023 Technical Regulations:
- A rounded top will now be required on the roll hoop, which will reduce the chance of it digging into the ground during an accident
- A change will be made to ensure a minimum height for the point of application of the homologation test
- There will be a new physical homologation test where the load pushes the roll hoop in the forward direction
- There will be a definition of new tests, to be carried out by calculation
Meanwhile, as a medium-term objective, the FIA also announced that it planned a “significant overhaul” of roll hoop safety tests for 2024 to ensure cars in the future can resist more significant loads.
WATCH: Everything you need to know about the 2026 engine regulations
YOU MIGHT ALSO LIKE
FeatureF1 Unlocked MONDAY MORNING DEBRIEF: How an Alonso cameo helped Norris prevent a Red Bull 1-2 in China
TechnicalF1 Unlocked TECH WEEKLY: Haas's significant Shanghai upgrade – and what it says about Komatsu's approach as team boss
News Perez rues bad luck with Safety Car in China after missing out on P2 as he vows to fight back in Miami
Feature FACTS AND STATS: Verstappen hits a hat trick of Sprint weekend doubles